Deve's Technical Network
Advance Design Chevy Trucks
(1947-1955 1st Series w/ some TF)

-----< Comments? Criticisms? Help Desk: deve@speedprint.com Open 24/7/365! >
Using an Old Style Air Filter Cannister on a Newer Style Carb!


This adapter allows you to use your vintage air filter cannister on a newer style carb that mounts differently. For example, the Pre-1955 Carbs had a smooth top area and the air filter had a circular clamp that held it on the outside. The newer Carbs have a bridge across the throat with a threaded post/wingnut arrangement. This mounts to the top of the newer style Carb to allow for using pre-1955 Air Filter Cannisters.







**Additional International Shipping Rates Apply**


The entire instruction on how to build this yourself: Instruction Document

The build instruction contains everything you need. We encourage you to build it yourself, however, if you can't do it, email deve@speedprint.com and we will get this done for you. If you have any questions or concerns, we are here to help. Either email Deve, or go to DTN Forums and join in on the conversation.

PROJECT DIRECTOR: DEVE KREHBIEL
CONTACT: DEVE@SPEEDPRINT.COM